Update Cisco CCNP 300-135 TSHOOT exam sample questions

So what you still waiting for, go to get new Passtcert Cisco CCNP 300-135 TSHOOT exam sample questions early.There are a lot of sites provide the Cisco CCNP 300-135 TSHOOT exam sample questions for you. Passtcert is only website which can provide you Cisco 300-135 exam certification with high quality. In the guidance and help of Passtcert, you can through your Cisco 300-135 exam the first time.

The information we have could give you the opportunity to practice issues, and ultimately achieve your goal that through Cisco 300-135 exam certification.Passtcert IT expert team take advantage of their experience and knowledge to continue to enhance the quality of Cisco CCNP 300-135 TSHOOT exam sample questions to meet the needs of the candidates and guarantee the candidates to pass the Cisco certification 300-135 exam which is they first time to participate in. Through purchasing Passtcert products, you can always get faster updates and more accurate information about the examination.

Share some CCNP 300-135 exam questions and answers below.
Ticket 4 NATACL 

TROUBLE TICKET STATEMENT: 

The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server). 
show run by yourself to obtain the following information: 
Configuration on R1 
ip nat inside source list nat_pool interface Serial0/0/0/1 overload ! 
ip access-list standard nat_pool 
permit 10.1.0.0 
! interface Serial0/0/0/1 
ip address 209.65.200.224 255.255.255.252 
ip nat outside 
! interfaceSerial0/0/0/0.12 
ip address 10.1.1.1 255.255.255.252 
ip nat inside 
ip ospf message-digest-key 1 md5 TSHOOT 
ip ospd authentication message-digest 

On Which device is the fault condition located? 
A. R1 
B. R2 
C. R3 
D. R4 
E. DSW1 
F. DSW2 
G. ASW1 
Answer: A 


Ticket 5 R1ACL 

TROUBLE TICKET STATEMENT: 
The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server). 
show run by yourself to obtain the following information: 
Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor. 
Configuration on R1 
! interface Serial0/0/0/1 
description link to ISP 
ip address 209.65.200.224 255.255.255.252 
ip access-group edge_security in 
ip nat outside 
ip virtual-reassembly 
ntp brasdcast client 
net broadcast key 1 
no cdp enable 
!! ip access-list nat_traffic permit 10.1.0.0 0.0.255.255 
ip access-list nat_traffic permit 10.2.0.0 0.0.255.255 
! ip access-list edge_security deny ip 10.0.0.0 0.255.255.255 any 
ip access-list edge_security deny ip 172.16.0.0 0.15.255.255 any 
ip access-list edge_security deny ip 192.168.0.0 0.0.255.255 any 
ip access-list edge_security deny ip 127.0.0.0 0.255.255.255 any 
ip access-list edge_security permit ip host 209.65.200.241 any 

On which device is the fault condition located? 
A. R1 
B. R2 
C. R3 
D. R4 
E. DSW1 
F. DSW2 
G. ASW1 
Answer: A 

What is the solution of the fault condition? 
A. Under the interface Serial0/0/0 configuration enter the ip nat inside command 
B. Under the interface Serial0/0/1 configuration enter the ip nat outside command 
C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command 
D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command 
Answer: C 

R1 and R2 OSPF neighbor. 
Which two statements are true? (Choose two) 
(Output from show ip ospf neighbors on 2 routers, one of them shows FULL/DR, the other FULL/-, you need to know how were they configured and will they exchange routes) 
A. They are not neighbors 
B. R1 (non-DR) will not update its routes to R2 
C. Router R2 is configured with ospf point-to-point command (R2 is the router that shows as FULL/-) 
D. They need to be configured as OSPF NBMA 
E. R2 should be configured as stub 
Answer: BC

Two routers are connected through PPP connection. After the PPP was established the admin put OSPF running above it. The OSPF formed adjacency but after soon the adjacency dropped. 
What is the reason? (The cause of OSPF forming an adjacency over a GRE tunnel and dropping immediately) 
A. MTU does not match 
B. Area 0 need to exist for OSPF to function properly 
C. Gre tunnel destination is not reachable through tunnel 
D. Gre tunnel ip address must be covered by network under ¡°router ospf 1¡± 
E. ospf routes contains the route to tunnel destination 
Answer: C

The Fault Condition is related to which technology? 
A. BGP 
B. NTP 
C. IP NAT 
D. IPv4 OSPF Routing 
E. IPv4 OSPF Redistribution 
F. IPv6 OSPF Routing 
G. IPv4 layer 3 security 
Answer: A

What is the solution of the fault condition? 
A. Under the BGP process,enter the bgp redistribute-internal command 
B. Under the BGP process, bgp confederation identifier 65001 command 
C. Delete the current BGP process and reenter all of the commands using 65002 as the AS number. 
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command. 
Answer: D

The Fault Condition is related to which technology? 
A. BGP 
B. NTP 
C. IP NAT 
D. IPv4 OSPF Routing 
E. IPv4 OSPF Redistribution 
F. IPv6 OSPF Routing 
G. IPv4 layer 3 security 
Answer: A 

What is the solution of the fault condition? 
A. Under the BGP process,enter the bgp redistribute-internal command 
B. Under the BGP process, bgp confederation identifier 65001 command 
C. Delete the current BGP process and reenter all of the commands using 65002 as theAS number. 
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command. 
Answer: D 

Passtcert will provide all the latest and accurate Cisco CCNP 300-135 TSHOOT exam sample questions for the staff to participate in 300-135 certification exam.Passtcert has special Cisco CCNP 300-135 TSHOOT exam sample questions, which can make you do not need to spend a lot of time and money but can get a lot of knowledge of IT technology to enhance your skills in a short time. And soon you will be able to prove your expertise knowledge and technology in IT industry.

Related article: http://h31-311-enu.blogspot.com/2017/09/update-cisco-ccnp-300-135-tshoot-exam.html